Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

New WQX 3.0 profiles are available at waterqualitydata.us/beta/. These profiles will contain recent USGS data added since March 11, 2024, which marks the beginning of limited accessibility for USGS data. Read more about the 3.0 profiles and associated changes here. This user interface only serves WQX2.2 profiles, which do NOT contain USGS data added after March 11, 2024.

WQP Home >  Providers >  STORET >  11NPSWRD_WQX >  11NPSWRD_WQX-GUMO_NPS_SIGNALWELL

Signal Peak Well (11NPSWRD_WQX-GUMO_NPS_SIGNALWELL) site data in the Water Quality Portal

Data Provider: STORET (Learn more about Water Quality Portal Data Providers)

This well site, maintained by the National Park Service Water Resources Division (identifier 11NPSWRD_WQX), has the name "Signal Peak Well" and has the identifier 11NPSWRD_WQX-GUMO_NPS_SIGNALWELL. This site is in the watershed defined by the 8 digit Hydrologic Unit Code (HUC)13050004.

This site is located in Culberson County County, Texas at 31.8462285600 degrees latitude and -104.8305830100 degrees longitude using the datum WGS84. No horizontal location accuracy metadata is available. This site is at an elevation of 4799 ft No vertical location accuracy metadata is available.

The well hole depth is 1240 ft.

To download the metadata about this site along with water quality data, go to the Portal Page and enter "11NPSWRD_WQX-GUMO_NPS_SIGNALWELL" into the "Site ID" box under Site Parameters

What other monitoring locations are upstream or downstream from this one?

Upstream and downstream locations

This map shows all Water Quality Portal stations that are 10 miles upstream (dashed dark blue) and 10 miles downstream (solid light blue) of this monitoring location (indicated by the large blue circle). The upstream and downstream functionality is provided by the Network Linked Data Index.

When were data collected at this location?

Periods of record for data characteristic groups

For a more detailed breakdown of data, go to the Monitoring Report at the EPA How's My Waterway Application
Characteristic Group Date Range*
Information 2006 - 2007
Physical 2006 - 2007
*Date ranges may contain gap years

What other information is available for this location?

Detailed Metadata

For the definitions of the metadata elements, please go to the Water Quality Portal user guide

Location Metadata Value
OrganizationIdentifier 11NPSWRD_WQX
OrganizationFormalName National Park Service Water Resources Division
MonitoringLocationIdentifier 11NPSWRD_WQX-GUMO_NPS_SIGNALWELL
MonitoringLocationName Signal Peak Well
MonitoringLocationTypeName Well
MonitoringLocationDescriptionText This station is at Signal Peak Well. This site is approximately 1.9 kilometers south-southwest of Guadalupe Pass. This well was drilled in 1976 to supply NPS temporary housing. Elevation was determined by Digital Elevation Mapping (DEM). This station has an additional ID from Texas Water Development Board as State Well No. 4710201 with the station name of U.S. National Park Service Signal Peak Well.
HUCEightDigitCode 13050004
LatitudeMeasure 31.8462285600
LongitudeMeasure -104.8305830100
HorizontalCollectionMethodName GPS-Unspecified
HorizontalCoordinateReferenceSystemDatumName WGS84
VerticalMeasure/MeasureValue 4799
VerticalMeasure/MeasureUnitCode ft
VerticalCollectionMethodName Other
VerticalCoordinateReferenceSystemDatumName UNKWN
CountryCode US
StateCode 48
CountyCode 109
WellHoleDepthMeasure/MeasureValue 1240
WellHoleDepthMeasure/MeasureUnitCode ft
ProviderName STORET